Requiring a subscription violates the right to repair. Even for backwater places where the right to repair isn't enshrined in law (like the usa), people still know what the right to repair is, and often refuse to use a paid service what what ought to have been included in the base price.
Like others have said: Tesla is the bath guy here. I'm pretty sure most people are focused on the other ways Tesla has been fing around that they just haven't gotten this far down the list.
Also, there's something special about tractors. Their owners (farmers) are both willing and capable of repairing tractors, in general, so John Deere is demonized for taking that ability away. Where as Tesla's owners are comfortable not changing their own oil, so "less" was taken away. (Yes, I know Tesla doesn't have engine oil, don't get hung up on that)
Oh that's simple. Both Tesla and John Deere are bad guys.
And yes. I am happy to expand that list to literally every other manufacturer you have in mind. They are all bad guys too. If manufacturers were altruistic good guys, they would need no regulation.
Heavy regulations are the reason why we have the John Deere semi monopoly. The regulatory entry cost is in the millions for any new player to enter the market so no one wants to compete and provide better service.
When I bought my current car, it came with an owners manual--for free!!
I can grab any data I want from the OBD port. The hardware was cheap, the software to use it is, again, free.
I'm not excited about this brave new world where you have to pay a subscription fee to plug a cable into a device you own and interact with it, and even less excited there are people here defending the idea.
You may not be aware but there are a lot of proprietary PIDs on your OBD2 bus you can't interpret without specialized software - you can get like oil pressure and temperature, but not say, shift points or anything the manufacturer doesn't think you should see. True right to repair would mean all of the PIDs get documented and there is a marketplace where I can purchase software or documentation without having to be a certified brand X mechanic.
What you want is the service manual. Owner manual should be implicit.
OBD port can work for some cars, for some of the data. But other cars do have specialized gear they require to either access either reset some stuff in some of the car's computers.
Yeah the owners and service manuals are two very very different things. You won't be performing much maintenance with the owners manual besides the absolute basics, like checking your oil.
The cheap OBD2 readers lack the vast majority of data and tools you would want to use for service as well.
There are aftermarket options but most manufacturers want you to subscribe to their service tools - often charged per monthly plus an additional a fee per VIN it touches. These cost in the hundreds to thousands. It can be pretty frustrating as a shadetree mechanic.
Notably, some vehicles like the Toyota Highlander you can’t even figure out when you need to change the spark plugs, let alone what kind of spark plugs you need from the owners manual.
Theoretically, they are to be replaced at 120k miles (!!) but they won’t even tell you that in the owners manual.
Because in agriculture you are absolutely expecting to be able to repair stuff yourself.
I work on a project related to it and was absolutely surprised at how the company gave instructions to the clients to help them fix their machines (stuff I wouldn't be able to do myself).
Having a non-working machine can mean big $$ lost everyday.
I've always been a bit confused about the right to repair debate, especially as it concerns John Deere equipment. I don't own any "new" John Deere products, but I do have a few pieces circa ~2010. Perhaps my experience is out of date.
Here's how it's always worked for me:
1. A code comes up on the computer.
2. A. The problem is self evident. Or;
2. B. I search online and find the problem. Or;
2. C. I search online and find the diagnostics manual, which I use to find the problem. Then I have diagnostics manual pdf forever, and can use this in the future.
3. A. I search online and find the parts diagram. Or;
3. B. I search my dealers website and find the parts diagram.
4. I order the part.
5. I install the part.
Has something changed with newer equipment that prevents farmers from doing this?
Newer Deere equipment has a lot of components that have to be adapted using DSA - turbo actuators, various hydraulic sensors, various suspension leveling sensors, fuel injectors, interior displays, and anything SCR related are the big ones. Basically, any sensor that needs a calibration step or triggers an emissions code, or a few intentionally vehicle locked modules (ECM).
Interesting. I just finished with a thorny hydraulics problem on a 9870 Combine. It turned out to be a faulty sensor. Part of my troubleshooting involved buying a new sensor, and swapping out each sensor in the system one by one with the new unit until I was sure they were all working correctly. No calibration needed. When i do need to calibrate a system i can do it all from the onboard computer.
Why would you pay extra for some website the company could just take away from you on a whim? I have the bound paper repair manuals for my 1998 Dodge truck, my 1995 Toyota, and my 2002 Kubota tractor. Nobody can arbitrarily take those away. Why can't companies these days just print a shop manual and be done with it?
>Why can't companies these days just print a shop manual and be done with it?
They would be losing money without overpriced repairs. That's why they lobby so hard against right to repair.
Even with some kind of right to repair it still seems they're trying to keep you hooked on their resources.
But as you said, service manual + schematics would be great for some people. But companies will fight tooth and nail against it. They lose control over obsoleting older products.
Because it doesn't address the actual problem.
The funny thing about that problem is that it is unsolvable.
The farmers problem is the company is squeezing too much money out of them.
There is no single solution to both problems.
Tesla for example lets you pay to access their diagnostic software, so why is John Deere the bad guy here?
Also, there's something special about tractors. Their owners (farmers) are both willing and capable of repairing tractors, in general, so John Deere is demonized for taking that ability away. Where as Tesla's owners are comfortable not changing their own oil, so "less" was taken away. (Yes, I know Tesla doesn't have engine oil, don't get hung up on that)
And yes. I am happy to expand that list to literally every other manufacturer you have in mind. They are all bad guys too. If manufacturers were altruistic good guys, they would need no regulation.
Regulation is the solution to this prisoner’s dilemma.
I can grab any data I want from the OBD port. The hardware was cheap, the software to use it is, again, free.
I'm not excited about this brave new world where you have to pay a subscription fee to plug a cable into a device you own and interact with it, and even less excited there are people here defending the idea.
The cheap OBD2 readers lack the vast majority of data and tools you would want to use for service as well.
There are aftermarket options but most manufacturers want you to subscribe to their service tools - often charged per monthly plus an additional a fee per VIN it touches. These cost in the hundreds to thousands. It can be pretty frustrating as a shadetree mechanic.
Theoretically, they are to be replaced at 120k miles (!!) but they won’t even tell you that in the owners manual.
Insane.
I work on a project related to it and was absolutely surprised at how the company gave instructions to the clients to help them fix their machines (stuff I wouldn't be able to do myself).
Having a non-working machine can mean big $$ lost everyday.
Here's how it's always worked for me:
1. A code comes up on the computer.
2. A. The problem is self evident. Or;
2. B. I search online and find the problem. Or;
2. C. I search online and find the diagnostics manual, which I use to find the problem. Then I have diagnostics manual pdf forever, and can use this in the future.
3. A. I search online and find the parts diagram. Or;
3. B. I search my dealers website and find the parts diagram.
4. I order the part.
5. I install the part.
Has something changed with newer equipment that prevents farmers from doing this?
What a systemic downgrade in capabilities.
They would be losing money without overpriced repairs. That's why they lobby so hard against right to repair.
Even with some kind of right to repair it still seems they're trying to keep you hooked on their resources.
But as you said, service manual + schematics would be great for some people. But companies will fight tooth and nail against it. They lose control over obsoleting older products.
same reason car dealerships want you to only go to them for maintenance
Which is a huge problem when you live in bum fuck nowhere like many farmers.